Samtec | Signal Integrity

Samtec has two different types of 3D models from which you may choose depending on the amount of detail needed in the model. Both models are acceptable for form, fit and function in most cases.
Basic Detail Models


	Basic 3D Models do not include inside body or pin details and are parts rather than assemblies, so they will have smaller file size and will be quicker to download. Although there are fewer Samtec product series in this list, every part number within that series will be available in all major formats including Pro/E, Solidworks, Mechanical Desktop, IGES, STEP, Parasolid, ACIS, Acrobat/PDF, and many more. The 3D Models for these can also be viewed on-line To view a Basic model, select the standard Samtec Series from the list to the left. Then click next.
Full Detail Models

	Full Detail 3D Models include inside body and pin detail and are assemblies rather than parts, so the file size will be larger. The majority of all Samtec product series are included in this list; however, not every part number for each series will have a model available. Models are available in IGES, STEP, Parasolid and ACIS formats. To view a Full Detail model, select the standard Samtec Series from the list to the left. Then click next.
Request New Models

If you do not find the Samtec product series that you need in the list above, please click the button below to request a new model. New models take 5-7 days to be created. Once finished, an e-mail will be sent informing you that the new model can be downloaded. Please note, requests cannot be completed without a valid email address and/or phone number.
While Samtec, Inc. has used reasonable efforts to ensure the model’s accuracy, Samtec does not guarantee that it is error-free. By downloading the files, you agree and understand that the information downloaded may not be completely accurate and the products depicted may not be the most recent version. You further agree that these files will be used at your own risk.
ACD, ASP, CEP, CIP, HDR, IM, LF0100, LF0150, MEP, OTP, PCBA, REF, RSP, SCF, SEP, SME, SUB-ASP, TCD Series - Information is not available here for Application Specific Products. Contact eASP for any information on this series of connectors. To create a new Application Specific Product, please visit our Custom Products Section. For information on our ASP connectors used in Agilent Logic Analyzer and other Test Probes and Debug Devices, Vita 42 XMC/RapidIO, Micro High Frequency, Nokia M2M, Altera, and PC/104 Express applications, please visit our Highlight ASP area. If you do not find the product series you are looking for above, please contact eNewProducts. To ensure a product meets TS 16949, automotive, or any other specific standards, the product must be an ACD Series. Go to www.samtec.com/TS for complete details.

I/O Products - 3D models for most of Samtec's I/O products are not yet available. Check for desired part under the "Full Detail" category above. If the series is not listed, click "3D Models" request button.