1. Choose the series you require based on the pitch and configuration that best fit your application. Click the view button to display a drawing for the pitch/configuration shown in the input box.

Please note that this interactive program provides a calculation from our test data based on the inputs provided and does not represent the potential maximum performance of the interconnect system. The data reflects the point where the allowable insertion loss occurs within the cable assembly based from a test circuit with a characteristic impedance of 50 ohm single-ended and a wiring pattern of Q-S-Q (where Q = quiet line terminated to Zc; S - active single line) within the pin field of the connector. Resonances in the loss data which may be caused by impedance mismatches at the ends of the cable assemblies are not included in the loss calculations. For any questions, comments or problems with the performance information obtained from this program, please contact our High Speed Cable Group.

Click here to view our Mated Cable Heights Chart for our High Speed cable assemblies.